Xerox ApeosPort-III C7600, User Manual

Page: 291 / 369

Registering/Deleting/Renaming Stored Programs
289
Stored Pr
ogram
m
ing
8
Registering/Deleting/Renaming Stored Programs
The [Stored Programming] screen allows you to register and delete stored programs.
Important • When registering a stored program to select paper size or type loaded on the bypass tray,
register both the paper size and the paper type. If only the paper size or type is registered,
the stored program may not be called properly.
• If any of the following operations is performed while a stored program is being registered,
the stored program may not be registered or may not work correctly.
- Removing or inserting a paper tray
- Loading or reloading paper on the bypass tray
• If any of the following operations is performed after a stored program registration, the
registered stored program may not be called properly.
- If the stored program has the Watermark feature and the Watermark value is changed.
- If the stored program has an operation for a folder and the folder passcode is changed.
- If the features displayed on the touch screen are changed.
- If the features assigned to the <Custom> buttons are changed.
- If any setting is changed under [Tools] > [System Settings] > [Copy Service Settings] >
[Preset Buttons].
- If the selection is made from a list of Address Book or Job Flow Sheet.
- If any options installed on the machine, such as a finisher, are changed, and thereby the
associated buttons become no longer available.
- If the measurement unit, millimeters or inches, is changed.
- If a document is selected from the list of the stored jobs in [Secure Print Jobs & More]
under Job Status.
Note • Any services that are set using the following cannot be registered: System Settings,
[Browse...] under Scan to PC, Job Flow Sheets, Network Scanning, Address Book, and
other stored programs.
• A stored program registration is cancelled when the <Interrupt> button is pressed, the Auto
Clear feature causes a time-out, or a popup window (such as a paper jam window) appears.
1
Press the <All Services> button.
2
Select [Setup].
1 2 3
4 5 6
7 8 9
0 #
C
<All Services> button