background image

Copy

73

Copy

3

„

Tray

Allows you to select a paper tray. When [Auto Paper Select] is selected, the machine 

automatically determines the tray holding the appropriate paper based on the 

document size and the specified copy ratio. When [5] is selected, the [Tray 5] screen 

is displayed where you can set a paper type other than plain paper, and non-standard 

size paper.

Refer to "[Tray 5] Screen" (P.73).

Note

The Tray 6 is optional.

„

% Full

Displays the remaining amounts of paper loaded in trays.

„

Paper Size

Displays paper sizes.

„

Paper Type

Displays paper types.

„

Paper Color

Displays paper colors.

For how to set [Paper Color], refer to "5 Tools" > "Common Service Settings" > "Paper Tray Settings" > 
"Paper Tray Attributes" in the Administrator Guide.

„

Size Detection

Displays how the machine detects a paper size.

For how to set [Size Detection], refer to "5 Tools" > "Common Service Settings" > "Paper Tray 
Settings" > "Paper Tray Attributes" in the Administrator Guide.

[Tray 5] Screen

If you want to use paper that cannot be loaded in Tray 1, 2, 3, 4, or 6, use Tray 5 

(Bypass).

1

Select a paper size and a paper type.

Note

Select [ ] to return to the previous 
screen or [ ] to move to the next screen.

[Auto Size Detect] is available only when 
standard sized paper is loaded.

„

Paper Size

Select from [Auto Size Detect], [Standard 

Size], and [Custom Size].
When you select [Auto Size Detect], the paper size is identified automatically.

When you select [Standard Size] or [Custom Size], refer to "When [Standard Size] is Selected" (P.74) or 
"When [Custom Size] is Selected" (P.74) 
respectively.

„

Paper Type

Select a paper type.

Summary of Contents for ApeosPort-III C7600


















































































































































































































































































































































































Reviews: