FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Y88—Define Page Offset
@Y88 <n1>, <n2> {,n3}@
Positions the logical page on the physical page. (Refer to the
“Page Orientation algorithm” section in this chapter.)
n1
0 to +/- 32000 horizontal margin compensation
in 1/1440 inch.
Default value is 0.
n2
0 to +/- 32000 vertical margin compensation in
1/1440 inch.
Default value is 0.
n3
Orientation as specified in FSL Y10—Set Page
Format.
Valid values are 0 to 9. The valid value for
Advanced Function Printing (AFP) is 20.
Remember
•
If n3 is not specified, the n1 and n2 values apply to all
orientations.
•
If Y88 is placed as the first printable data on the page, it has
immediate effect. If the command is placed at any other
position on the page, the function has effect on the next
page.
•
This function must be enabled using Y89.
Example 1
@Y88, -144, -240, 1@ selects the left margin to be negatively
offset 144/1440" (=1 character to the left in 10 CPI), top margin
to be negatively offset 240/1440" (=1 line towards the top in 6
LPI) with orientation as specified in FSL Y10: n1 = 1.
Example 2
@Y88, 576, 480, 0@ selects left margin to be offset 576/1440"
(=4 characters to the right in 10 CPI), top margin to be offset
480/1440" (=2 lines down in 6 LPI) with orientation as specified
in FSL 10: n1 = 0 (Portrait, no compression).
Y89—Enable Page Offset
@Y89, n1 {,n2}@
Compensates the physical left margin offset on laser printers that
have physical left margin limits.
If this function is deactivated, you may experience some data loss
in the left margin.
All characters between the left and the physical left margin will
be printed on the first position of the physical left margin.
XEROX MRP FAMILY COAX COMMAND REFERENCE
3-57
