FORMS UTILITY FOR THE COAX ENVIRONMENT
Below is an example of a VPS Remote Configuration file.
******************************************
* LPA0DT20 - REMOTE 156 FOR XEROX CENTRE *
******************************************
*____________________________*
* VTAM DEFINITIONS
*
*____________________________*
LUNAME = LPA0DT20,
PRINTER LUNAME
ALOGMODE = SCS,
DEFAULT LOGMODE ENTRY
SEPINFO = USEREX01,
*____________________________*
* JES SYSOUT SELECTION CRITERIA
*
*____________________________*
TRACE = (Y,05),
TRNCLASS = (A,C,35),
DEST = R156,
DEST ID
CLASS = ABCJ,
OUTPUT CLASSES
CHNSIZE = 0,
SCS PRINTER
COMPRESS = N,
NO COMPRESSION
MERGE = Y,
RUSIZE = 1536,
PRINTER BUFFER SIZE
SEPAR = N,
SEPARATOR = BOTH
AUTOEJCT = Y,
AUTOMATIC EJECT = YES
FCB = N,
FCB SUPPORT = NO
*____________________________*
* GROUP DEFINITIONS
*
*____________________________*
GRPNAME = USMG
42XX/MRP transparency
In order for transparency data (hexadecimal 35) to be recognized
by the 42xx/MRP, the printer must be placed in transparency
mode. The Function Selection via Line (FSL) command, Y37,
allows a user to select an IBM printer emulation. By sending Y37
with a value of 4 via FSL command, the printer will be placed in
transparent mode. Follow the steps below:
1. Create a file containing the following command:
&&??%%Y37,4%&&??<SPACE>
This sets the printer in transparent mode and resets the
escape character to NONE.
Note: To save the settings in permanent memory on the
printer, FSL X1 must be added to above command. For
example, this command sets the printer in transparent mode:
&&??%%Y37,4%
The following command saves the settings in permanent
memory and resets the escape character to NONE:
&&??%%X1&&??<SPACE>
I-2
XEROX MRP FAMILY COAX COMMAND REFERENCE
