wtw inoLab 740, Operating Manual

Page: 224 / 274

Data output
224
12.3 Outputting data to an external printer/PC
Via the RS 232 interface on the terminal, you can transmit
the data to a PC or an external printer.
Connect the interface to the devices via the AK T-PC (PC)
or AK T-9PIN/25PIN (ext. printer) cable.
The data output automatically switches to the RS232
interface.
Warning
If a grounded PC/printer is connected, you can also
measure in grounded media.
Set up the following transmission data on the PC/printer:
Socket assignment
Baud rate can be selected from: 1200, 2400, 4800,
9600
Handshake RTS/CTS + Xon/Xoff
Parity none
Data bits 8
Stop bits 1
1 RTS
2 RxD
3 TxD
4 DTR
RS 232
REC
1
3
4
5
6
2
5 SG
6 CTS