wtw inoLab 740, Operating Manual

Page: 225 / 274

Data output
225
12.3.1 Outputting data to the RS232/REC interface
To output data to an external printer/PC, the data output
must be switched to the RS232/REC interface.
12.3.2 Setting the baud rate
The baud rate for the RS232/REC interface must be the
same as the baud rate of the connected devices.
1 Switch to the Menu mode.
2 Use
46
to select the main Opt menu.
3 Select the RS232 menu item with
82
.
4 Confirm the RS232 menu item with
g
.
The data is output to the RS232/REC interface (
✔
).
5 Terminate the Menu mode with
m
.
1 Switch to the Menu mode.
2 Use
46
to select the main Opt menu.
3 Select the RS232/Prt menu item with
82
.
4 Confirm the RS232/Prt menu item with
g
.
5 Select the Baudrate menu item with
82
.
6 Confirm the Baudrate menu item with
g
.
7 Use
82
to select the required baud rate 1200, 2400,
4800 or 9600.