wtw inoLab 740, Operating Manual

Page: 219 / 274

Data output
219
12.2.2 Switching on the integrated printer
It is only possible to print with the integrated printer if the
printer has been switched on.
Note
Line feed with
f
is only possible when the integrated
printer has been switched off (the print LED lights up red).
12.2.3 Data output to the integrated printer
Data is either output to the integrated printer or to the RS232
interface. You can select where to output the data in the
Opt
menu.
1 Switch on the printer with
o
.
The print LED lights up green.
The printer is ready for operation.
1 Switch to the Menu mode.
2 Use
46
to select the main Opt menu.
3 Select the Int. Prn menu item with
82
.
4 Confirm the Int. Prn menu item with
g
.
The data output is switched to the integrated printer
(
✔
).
5 Terminate the Menu mode with
m
.