
86
The equivalent ICLI commands are:
# configure terminal
(config)# interface GigabitEthernet 1/1
! Set CoS to 2 and PCP to 1
(config-if)# qos cos 2
(config-if)# qos pcp 1
(config-if)# end
Basic QoS: Tagged Frame Classification per Port
Ingress port tag classification can be done based on the PCP and DEI values received on the incoming packets. This is
done by enabling tag classification for that port.
Example
: Map PCP 0 and DEI 0 to CoS 2 and DPL 0, Map PCP 0 and DEI 1 to CoS 3 and DPL 1 on Port 2.
Configuring Ingress Port Tag Classification Using WebGUI
In order to configure the mapping from PCP 0 and DEI 0 to CoS 2 and DPL 0, and mapping from PCP 0 and DEI 1 to CoS 3
and DPL 1 on Port 2, please perform to the following steps.
1.
Click
Configuration
>
QoS
>
Port Classification
.
2.
On the
Port Classification
page, click the
Tag Class
corresponding to the port, and enter the
parameters as shown in the following illustration.
Map PCP and DEI for Tagged Frames