111
Configuring Egress Map 40 Using WebGUI
To configure Egress Map 40 with the following properties, perform the following steps.
•
Set PCP to 7 and DSCP to 46 on frames classified to CoSID 1.
•
Set PCP and DSCP to 0 on frames classified to all other CoSID values (default mapping).
1.
To create a new Egress Map, click
Configuration
>
QOS
>
Egress Map
, and click the
Add New Map
icon.
Create QoS Egress Map Entry
2.
Enter the configuration as shown in the following illustration.
Set Up QoS Egress Map with CoSID Key-Type
3.
Click
Submit
.
QoS Egress Map CoSID Key-Type Summary
4.
Click the
Map ID 40
link and add a single entry in the
CoS ID
table by clicking the
Add New Map
icon.
•
Expand QoS Egress Map CoSID Entry and Rule Setup
5.
Associate Ports 1 and 2 with Egress Map 40.
