109
(config-qos-map-ingress)# map pcp 5 to class 1 cos 1
(config-qos-map-ingress)# map pcp 6 to class 1 cos 1
(config-qos-map-ingress)# map pcp 7 to class 1 cos 1
(config-qos-map-ingress)# end
!Associate port 1 and 2 with Ingress Map 20. # configure terminal
(config)# interface GigabitEthernet 1/1-2 (config-if)# qos
ingress-map 20
(config-if)# end
!Create a new QCE with ID 123 that matches all polackets from all ports where destination MAC address is
multicast. Associate it with Ingress Map 20.
# configure terminal
(config)# qos qce 123 dmac multicast action ingress-map 20 (config)# end
Example
: Create Ingress Map 21 with the following properties:
•
IP frames with DSCP 46 (Expedited Forwarding) are mapped to CoS 5 and CoSID 1.
•
IP frames with all other DSCP values are mapped to CoS 0 and CoSID 0 (default mapping).
Configuring Ingress Map 21 Using WebGUI
To configure Ingress Map 21 with the following properties, perform the following steps.
•
IP frames with DSCP 46 (expedited forwarding) are mapped to CoS 5 and CoSID 1.
•
IP frames with all other DSCP values are mapped to CoS 0 and CoSID 0 (default mapping).
1.
To create a new Ingress Map, click
Configuration
>
QOS
>
Ingress Map
, and click the
Add New Map
icon.
Create QoS Ingress Map Entry for DSCP Key-Type
2.
Enter the configuration as shown in the following illustration.
Set up QoS Ingress Map with DSCP Key-Type
