17
Global Configuration Mode:
Type configure terminal in privileged EXEC mode. Then User can enter the Global
Configuration mode. In Global Configuration mode, User can configure all the features that the system provides. Type
exit
to leave and press
?
to see the command list.
The command lists of global configuration mode.
# configure terminal
(config)# ?
aaa Authentication, Authorization and Accounting
access Access management
access-list Access list
aggregation Aggregation mode
banner Define a banner
default Set a command to its defaults
do To run exec commands in the configuration mode
dot1x IEEE Standard for port-based Network Access Control
enable Modify enable password parameters
end Go back to EXEC mode
exit Exit from current mode
green-ethernet Green Ethernet (Power reduction)
help Description of the interactive help system
hostname Set system's network name
interface Select an interface to configure
ip IPv4 configurations
lacp LACP settings
line Configure a terminal line
lldp LLDP configurations.
logging System logging message
loop-protect Loop protection configuration
mac MAC table entries/configuration
monitor Monitoring different system events
no Negate a command or set its defaults
password Specify the password for the administrator
port-security This command is obsolete.
privilege Command privilege parameters
prompt Set prompt
qos
radius-server Configure RADIUS
relay-output Relay output configuration
snmp-server Set SNMP server's configurations
spanning-tree Spanning Tree protocol
svl Shared VLAN Learning
thermal-protect Thermal protection configurations.
time System time
vlan VLAN commands
(config)#
