38
Trap Source Configurations
This page provides SNMP trap source configurations. A trap is sent for the given trap source if at least one filter with
filter type included matches the filter, and no filters with filter type excluded matches.
Delete
Check to delete the entry. It will be deleted during the next save.
Name
Indicates the name for the entry.
Type
The filter type for the entry. Possible types are:
included
: An optional flag to indicate a trap is sent for the given trap source is matched.
excluded
: An optional flag to indicate a trap is not sent for the given trap source is matched.
Subset OID
The subset OID for the entry. The value should depend on the what kind of trap name. For example, the
ifIdex is the subset OID of linkUp and linkDown. A valid subset OID is one or more digital
number(0-4294967295) or asterisk(*) which are separated by dots(.). The first character must not begin
withasterisk(*) and the maximum of OID count must not exceed 128.
Buttons
Add New Entry
: Click to add a new entry. The maximum entry count is
32
.
Submit
: Click to submit changes.
Reset
: Click to undo any changes made locally and revert to previously saved values.
Communities
SNMPv3 Community Configuration
Configure SNMPv3 community table on this page. The entry index key is
Community
.
Delete
Check to delete the entry. It will be deleted during the next save.
Community Name
Indicates the security name to map the community to the SNMP Groups configuration. The allowed string
length is 1 to 32, and the allowed content is ASCII characters from 33 to 126.
Community Secret
Indicates the community secret (access string) to permit access using SNMPv1 and SNMPv2c to the SNMP
