69
This defines the initial value of remaining Hops for MSTI information generated at the boundary of an MSTI
region. It defines how many bridges a root bridge can distribute its BPDU information to. Valid values are in the
range 6 to 40 hops.
Transmit Hold Count
The number of BPDU's a bridge port can send per second. When exceeded, transmission of the next BPDU will
be delayed. Valid values are in the range 1 to 10 BPDU's per second.
Advanced Settings
Edge Port BPDU Filtering
Control whether a port
explicitly
configured as
Edge
will transmit and receive BPDUs.
Edge Port BPDU Guard
Control whether a port
explicitly
configured as
Edge
will disable itself upon reception of a BPDU. The port will
enter the
error-disabled
state, and will be removed from the active topology.
Port Error Recovery
Control whether a port in the
error-disabled
state automatically will be enabled after a certain time. If recovery
is not enabled, ports have to be disabled and re-enabled for normal STP operation. The condition is also cleared
by a system reboot.
Port Error Recovery Timeout
The time to pass before a port in the
error-disabled
state can be enabled. Valid values are between 30 and
86400 seconds (24 hours).
Buttons
Submit
: Click to submit changes.
Reset
: Click to undo any changes made locally and revert to previously saved values.
This page allows the user to inspect the current STP CIST port configurations, and possibly change them as well.
This page contains settings for physical and aggregated ports.
