49
Buttons
Refresh
: Click to refresh the page.
Submit
: Click to submit changes.
Reset
: Click to undo any changes made locally and revert to previously saved values.
ACL
Ports
Configure the ACL parameters (ACE) of each switch port. These parameters will affect frames received on a port
unless the frame matches a specific ACE.
Port
The logical port for the settings contained in the same row.
Policy ID
Select the policy to apply to this port. The allowed values are
0
through
63
. The default value is 0.
Action
Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default value is "Permit".
Rate Limiter ID
Select which rate limiter to apply on this port. The allowed values are
Disabled
or the values
1
through
16
.
The default value is "Disabled".
Port Redirect
Select which port frames are redirected on. The allowed values are
Disabled
or a specific port number and it
can't be set when action is permitted. The default value is "Disabled".
Mirror
Specify the mirror operation of this port. The allowed values are:
Enabled
: Frames received on the port are mirrored.
