39
agent. The allowed string length is 1 to 32, and the allowed content is ASCII characters from 33 to 126.
Source IP
Indicates the SNMP access source address. A particular range of source addresses can be used to restrict
source subnet when combined with source prefix.
Source Prefix
Indicates the SNMP access source address prefix.
Buttons
Add New Entry
: Click to add a new community entry.
Submit
: Click to submit changes.
Reset
: Click to undo any changes made locally and revert to previously saved values.
Users
SNMPv3 User Configuration
Configure SNMPv3 user table on this page. The entry index keys are
Engine ID
and
User Name
.
Delete
Check to delete the entry. It will be deleted during the next save.
Engine ID
An octet string identifying the engine ID that this entry should belong to. The string must contain an even
number(in hexadecimal format) with number of digits between 10 and 64, but all-zeros and all-'F's are not
allowed. The SNMPv3 architecture uses the User-based Security Model (USM) for message security and the
View-based Access Control Model (VACM) for access control. For the USM entry, the usmUserEngineID and
usmUserName are the entry's keys. In a simple agent, usmUserEngineID is always that agent's own
snmpEngineID value. The value can also take the value of the snmpEngineID of a remote SNMP engine with
which this user can communicate. In other words, if user engine ID equal system engine ID then it is local
user; otherwise it's remote user.
User Name
A string identifying the user name that this entry should belong to. The allowed string length is 1 to 32, and
the allowed content is ASCII characters from 33 to 126.
Security Level
Indicates the security model that this entry should belong to. Possible security models are:
NoAuth, NoPriv
: No authentication and no privacy.
Auth, NoPriv
: Authentication and no privacy.
Auth, Priv
: Authentication and privacy.
The value of security level cannot be modified if entry already exists. That means it must first be ensured
