140
Chassis ID
The
Chassis ID
is the identification of the neighbor's LLDP frames.
Port ID
The
Port ID
is the identification of the neighbor port.
Port Description
Port Description
is the port description advertised by the neighbor unit.
System Name
System Name
is the name advertised by the neighbor unit.
System Capabilities
System Capabilities
describes the neighbor unit's capabilities. The possible capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the capability is disabled, the capability is
followed by (-).
Management Address
Management Address
is the neighbor unit's address that is used for higher layer entities to assist discovery
by the network management. This could for instance hold the neighbor's IP address.
Buttons
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
Refresh
: Click to refresh the page.
EEE
By using EEE power savings can be achieved at the expense of traffic latency. This latency occurs due to that the
circuits EEE turn off to save power, need time to boot up before sending traffic over the link. This time is called
"wakeup time". To achieve minimal latency, devices can use LLDP to exchange information about their respective tx
