PAGE 73 OF 164
PNEUMATIC MAST WITH REMOTE LOCKING SYSTEM
OPERATING INSTRUCTIONS
TP-5580101-A
FEBRUARY 2022
5.3 Installation Hardware
This section describes hardware that may be used during installation as follows:
• Table 5-2 Hardware for Internal Mount Application Installation
• Table 5-3 Hardware for External Mount Application Installation
• Table 5-4 Hardware for Ultra Heavy Duty Installation
Table 5-2 Hardware for Internal Mount Application Installation
Hardware*
Supplied By
Notes
Internal Mounting Kit (To the Roof)
¼ Inch (M6) Bolts
Customer
Internal mounting kits for 6.75, 9.0, and
11.25 inch base tubes require eight sets
of hardware. Internal mounting kits for 5.0
inch base tubes require six sets of
hardware.
The bolts should be sized to length to
allow for the thickness of the internal
mounting kit, lock washer, nut, roof, and
any spacers.
¼ Inch (M6) Lock Washers
Customer
¼ Inch (M6) Nuts
Customer
Non-Rotatable Base Plate (To the Mast)
(4) ⅜-16x1 Flathead Screws
(P/N: 2772)
The Will-Burt
Company
Found in the Hardware Bag
Non-Rotatable and Rotatable Base Plate (To the Mounting Surface)
(4) ⅜-16x1-½ Inch Bolts
(P/N: 901594)
The Will-Burt
Company
Found in the Hardware Bag
(4) Flat Washers (P/N: 2054)
The Will-Burt
Company
Found in the Hardware Bag
(4) Lock Washers (P/N: 0801)
The Will-Burt
Company
Found in the Hardware Bag
(4) Nuts (P/N: 901593)
The Will-Burt
Company
Found in the Hardware Bag
Summary of Contents for 10-60 HDL
Page 2: ......
