PAGE 75 OF 164
PNEUMATIC MAST WITH REMOTE LOCKING SYSTEM
OPERATING INSTRUCTIONS
TP-5580101-A
FEBRUARY 2022
Table 5-3 Hardware for External Mount Application Installation
Hardware*
Supplied By
Notes
Shelf Bracket (Optional) (To the Support Structure)
(4) Bolts
Customer
Bolts should be sized to length to allow
for the thickness of the shelf bracket,
support structure, and any spacers and
mounting hardware.
Shelf bracket P/N: 4434101 uses ⅜ inch
hardware. This shelf bracket is used for
non-rotating and rotating masts with 5.0
inch base tubes and non-rotating masts
with 6.75 inch base tubes.
Shelf brackets P/N: 4454001, P/N:
4454101, and P/N: 913947 use ½ inch
hardware.
(Part Numbers for clear anodized finish
only.)
(4) Flat Washers
Customer
(4) Lock Washers
Customer
(4) Nyloc Nuts
Customer
Non-Rotatable Base Plate (To the Mast)
(4) ⅜-16x1 Flathead Screws
(P/N: 2772)
The Will-Burt
Company
Found in the Hardware Bag
External Support Bracket (P/N: 4443601) (To the Support Structure)
(6) Sets of ⅜ Inch Hardware
Customer
The bolts should be sized to length to
allow for the thickness of the external
support bracket, support structure, any
spacers, and all mounting hardware (e.g.
flat washers, lock washers, and nuts).
External Support Bracket (P/N: 909984 and P/N: 4894901) (To Support Structure)
(6) Sets of ½ Inch Hardware
Customer
The bolts should be sized to length to
allow for the thickness of the external
support bracket, support structure, any
spacers, and all mounting hardware (e.g.
flat washers, lock washers, and nuts).
Summary of Contents for 10-60 HDL
Page 2: ......
