PAGE 92 OF 164
PNEUMATIC MAST WITH REMOTE LOCKING SYSTEM
OPERATING INSTRUCTIONS
TP-5580101-A
FEBRUARY 2022
h. Tighten the left side. Ensure the external support bracket snuggly secures the mast without
bending the support bracket clamp. If necessary, adjust the shims. Torque to 15.83-20 ft.-
lb. (21-27 Nm).
Note: If it is necessary to adjust the shims, they can be removed without completely
loosening the hardware. To adjust the location of a shim:
i. Push up on the shim from the bottom until the bottom of the grooves in the shim touch
the bolts (Figure 5-11).
Figure 5-11 Push Up Shim
ii. Pull out the shim (Figure 5-12).
Figure 5-12 Remove Shim
iii. Relocate and insert the shim to its new position.
iv. Push the shim down into position.
i. Torque all hardware as appropriate for its material and size.
5. If necessary, use the external support bracket as a template to drill holes in the desired
support structure. Ensure the mast system is level in all directions during drilling.
Summary of Contents for 10-60 HDL
Page 2: ......
