PAGE 33 OF 164
PNEUMATIC MAST WITH REMOTE LOCKING SYSTEM
OPERATING INSTRUCTIONS
TP-5580101-A
FEBRUARY 2022
Screws from the hardware bag (Section 3.3.1.1) can be used to attach the non-rotating base
plate to the base of the mast. Bolts, nuts, and washers from the hardware bag are sized for the
through-holes in the corners of the base plate so the mast can be secured to a mounting surface.
For more information on non-rotatable base plate options, see www.willburt.com.
Rotatable Hardware Kits
In addition to stabilizing and securing the mast to a mounting surface, the rotatable base plate
(Figure 3-14) and turning handles (Figure 3-15) enable the mast to be rotated. The exact
configuration of the rotatable base plate may vary.
In general, the rotatable hardware kit includes:
• A Rotatable Base Plate Assembly
• A Turning Handles Assembly
• An Instruction Sheet
The turning handles assembly:
• Wraps around the base tube and is secured with hardware included in the kit
• Aids the operator in rotating the mast into position
A hole in the center of the rotatable base plate (Figure 3-14) allows the option of routing air to the
bottom of the base tube.
Figure 3-14 Rotatable Base Plate Assembly
(P/N: 5074601 Shown)
Figure 3-15 Turning Handles Assembly
(P/N: 908174 Shown)
Center Hole
Locking Screw
Summary of Contents for 10-60 HDL
Page 2: ......
