PAGE 74 OF 164
PNEUMATIC MAST WITH REMOTE LOCKING SYSTEM
OPERATING INSTRUCTIONS
TP-5580101-A
FEBRUARY 2022
Turning Handles (To Mast)
(2) ¼-20x1.50 Hex HD Bolts
(P/N: 2000)
The Will-Burt
Company
Ships with Turning Handles
(2) ¼-20 Nyloc Nuts (P/N: 1930)
The Will-Burt
Company
Ships with Turning Handles
Flashing Kit (Rotatable Super Heavy Duty Masts) (To the Mast)
(6) ¼-20x0.75 Inch Bolts (P/N:
4542)
The Will-Burt
Company
Ships with Flashing Kit
(12) ¼ Flat Washers (P/N: 0800)
The Will-Burt
Company
Ships with Flashing Kit
(6) ¼ Nyloc Nuts (P/N: 1930)
The Will-Burt
Company
Ships with Flashing Kit
Control Box (To the Mounting Structure)
(4) ¼ (M6) Screws
Customer
The bolts should be sized to length to
allow for the thickness of the control box
feet, support structure, any spacers, and
all mounting hardware (e.g. flat washers,
lock washers, and nuts).
HHRC Holder (To the Mounting Structure)
(2) #8 (M4) Flathead Screws
Customer
The bolts should be sized to length to
allow for the thickness of the HHRC,
support structure, any spacers, and all
mounting hardware (e.g. flat washers,
lock washers, and nuts).
* Unless otherwise indicated, the mounting hardware must include proper means to resist vibration loosening such
as thread-locking compound or locking hardware. Torque all hardware as appropriate for its size and grade. Torque
values in these instructions assume the use of The Will-Burt Company provided hardware. Depending on the
specific installation application, all hardware may not be used. Additional hardware may be required for additional
accessories, or customer-specific applications.
Table 5-2 Hardware for Internal Mount Application Installation (Continued)
Hardware*
Supplied By
Notes
Summary of Contents for 10-60 HDL
Page 2: ......
