PAGE 77 OF 164
PNEUMATIC MAST WITH REMOTE LOCKING SYSTEM
OPERATING INSTRUCTIONS
TP-5580101-A
FEBRUARY 2022
Table 5-4 Hardware for Ultra Heavy Duty Installation
Hardware*
Supplied By
Notes
Non-Rotatable Base Plate (To the Mast)
(4) ½-13x1.25 Flathead
Screws (P/N: 5402)
The Will-Burt
Company
Found in the Hardware Bag
External Support Bracket (To the Support Structure)
(6) Sets of ⅜ Inch
Hardware
Customer
The bolts should be sized to length to allow for the
thickness of the external support bracket, support
structure, any spacers, and all mounting hardware
(e.g. flat washers, lock washers, and nuts).
Internal Mounting Kit (To the Roof) (Used in place of the External Support Bracket)
(8) ⅜-16x3.50 Bolts
(P/N: 5431)
The Will-Burt
Company
Included with internal mounting kit. Included
hardware is sized for a ¼ inch (6.35 mm) roof. If a
thicker roof is present, the customer must supply
appropriate hardware.
(16) ⅜x1.0 Flat
Washers
(P/N: 2054)
The Will-Burt
Company
(8) ⅜-16 Nyloc Nuts
(P/N: 2763)
The Will-Burt
Company
Non-Rotatable Base Plate (To the Mounting Surface)
(6) ⅜-16x1-½ Inch
Bolts (P/N: 901594)
The Will-Burt
Company
Found in the Hardware Bag
(6) Flat Washers (P/N:
2054)
The Will-Burt
Company
Found in the Hardware Bag
(6) Lock Washers (P/N:
0801)
The Will-Burt
Company
Found in the Hardware Bag
(6) Nuts (P/N: 901593) The Will-Burt
Company
Found in the Hardware Bag
Control Box (To the Mounting Structure)
(4) ¼ (M6) Screws
Customer
The bolts should be sized to length to allow for the
thickness of the control box feet, support structure,
any spacers, and all mounting hardware (e.g. flat
washers, lock washers, and nuts).
Summary of Contents for 10-60 HDL
Page 2: ......
