Wilan LIBRA 5800 AP, User Manual

Page: 95 / 156

Libra 5800 field installation
June 2003 Rev 0 95
3. Have the NOC “ping” the CPE from the NOC. A successful ping test means that the network
“sees” the CPE on the network.
4. Connect the CPE Ethernet Port to the customer LAN or PC.
5. Ping from the Customer LAN or PC to the NOC.
6. Use ftp to send some larger test files from the NOC to the PC or other IP device on the LAN.
7. Measure file transfer rates in both directions.
➧
Secure the installation
Finish up the installation by doing the following.
1. Secure all the cables and weatherproof outside cable connection points.
2. Clean up all boxes, cables and other materials.
3. Record installation information as required by the service provider such as
• Link Distance
• Site Locations (GPS coordinates)
• Unit configuration
• Link quality statistics
• Antenna cable configuration
• Unit model, Unit serial number, MAC address, IP address and IP submasks
• Unit password
• Antenna azimuth.
4. Demonstrate to the customers that the installation works and that they can contact sites on the
far side of the wireless link and upload and download data.
5. Have the customers sign a document to indicate their acceptance of the installation.