Wilan LIBRA 5800 AP, User Manual

Page: 70 / 156

Configuration
70 Libra 5800 Series User Guide
Radio Configuration
You can configure radio settings such as RF station IDs, Sector ID, Synchronization ID, center
frequencies transmit power and Base Station modulation type with the Radio Configuration menu.
Setting the RF Station ID (P-MP Only)
Each AP, CPE or LCPE unit requires a unique RF Station ID to identify it on the network. Every unit
must have a unique RF Station ID. No two units in a single sector (i.e. one controlled by a single AP)
may have the same ID.
➧
To set the RF station ID
1. From the Main System Menu, select
Radio Configuration
and press Enter .
The Radio Configuration menu appears.
2. Select
RF Station Id [1..2048]
and press Enter . The entry field highlights.
3. Type a unique number for the RF Station ID and press Enter . Zero is not a valid Station ID.
4. Record the RF Station ID you have assigned to the unit.You will need to know this number when
you configure the polling list on the Access Point.
5. Reboot the system to effect the changes. See Reboot Current Image , page 60 .
Radio Configuration
OFDM Station Type Base Station
RF Station Id [1..2047] -> 2
Sector Id [0..31] 1
Synchronization Id [0..1] 0
Base Station Tx Disable
Center Freq (kHz) 5787000
Set Tx Power (dBm) [-3...17] 17
Modulation Type QAM 16
Note: Changes on this menu aside from Tx Power require that the
unit be rebooted to take effect.