Wilan LIBRA 5800 AP, User Manual

Page: 80 / 156

Configuration
80 Libra 5800 Series User Guide
Note: If you turn on IP filtering and want to allow broadcast traffic to flow through the unit, enter the
IP Broadcast address into the list; i.e.
Host/Net Address = 255.255.255.255 and
Host/Net Mask = 255.255.255.255.
➧
To configure the remote IP filter
1. Follow the procedure in the previous section to enable IP Filtering Option by setting it to Filter.
2. Select
On
in the filter row you are defining and press Enter . The entry field highlights.
3. Use the arrow keys to select the desired filter type where
Filter
A numbered list of the filters
Type
Filter type can be Off or On
Host/Net
Address
IP Filter net or host IP Address
Host/Net
Mask
Mask applied to the filter host or net address. Address and Mask = host and net
number
Off
Do not filter the packets. This is the factory default
On
Filter the packets