Wilan LIBRA 5800 AP, User Manual

Page: 108 / 156

Appendix B: SNMP MIB
108 Libra 5800 Series User Guide
Obtaining SNMP Software
SNMP network management software is available commercially or as shareware. For instance, you
can download a free evaluation copy from www. mg-soft.com.
You also require a proprietary MIB file, which you can download from www. wi-lan.com or obtain by
contacting Wi-LAN’s Technical Assistance Center. After you download the MIB file, you must compile
it with the SNMP compiler.
Using Wi-LAN MIB Object Identifier Nodes
All OID (Object Identifier) nodes in the private Wi-LAN MIB are numbered 1.3.6.1.4.1.2686.n, where
“n” is a private Wi-LAN MIB node number or branch of numbers.
All nodes containing statistical information are cleared on powerup and reset.
Values in all writeable nodes are stored in Flash memory and are retained until overwritten by the
administrator, even following power down or reboot.
System Commands
Node Label Object ID Type Access Description
defaultImage 1.3.6.1.4.1.2686.1.
1.1 INTEGE
R Read/
Write Set Default System Image:
Factory Image (-2) or a file ID
displayed by the dir command
reboot 1.3.6.1.4.1.2686.1.
2.1 INTEGE
R Write-only Reboot Current Image
restFactory 1.3.6.1.4.1.2686.1.
2.2 INTEGE
R Write-only Restore Poweron Configuration
restPoweron 1.3.6.1.4.1.2686.1.
2.3 INTEGE
R Write-only Restore the Poweron/Reset
Configuration
rebootNewImag
e 1.3.6.1.4.1.2686.1.
2.4 INTEGE
R Write-only Reboots new image.