Wilan LIBRA 5800 AP, User Manual

Page: 50 / 156

Configuration
50 Libra 5800 Series User Guide
System Security
The System Security menu enables you to control access to the Libra 5800 system. You can control
remote access, assign community names and set passwords and the timeout period.
Setting Ethernet and wireless access to the TCP/IP Stack
Access to a Libra unit can be controlled by restricting the type of link that can be used to make
configuration changes: wired (Ethernet) or wireless access. You can enable or disable the type of link
independently with the two different access settings. These settings do not affect the unit’s ability to
carry traffic just access to the unit’s local management functions.
➧
To enable Ethernet access to the TCP/IP
1. From the Main System Menu, select
System Security
and press Enter .
The System Security menu appears.
2. Select
System Ethernet Access
and press Enter .
3. Select the desired setting from the list by using the up and down arrow keys and press Enter .
4. Press Enter . The change has been made.
on Enable configuration access to the unit from
Ethernet
off Disable configuration access to the unit from
Ethernet