Wilan LIBRA 5800 AP, User Manual

Page: 123 / 156

June 2003 Rev 0 123
Appendix E: Bench Configuration Testing
Overview
This chapter explains how to assemble, configure and test Libra equipment to familiarize yourself
with it or to help debug it should problems occur. Equipment will be tested in pairs consisting of an
AP and a CPE for a P-MP system or two P-P units (RD’s or ER’s) in a controlled environment such
as a lab.
Detailed information about configuring Libra units can be found in Configuration, page 27 .
Field installation procedures are described in Field Installation, page 89 .
Setup process
Bench testing your new Libra 5800 units includes four steps, from unpacking the shipping package to
performing simple network tests.
Setup steps
1
2
3
4
Check shipping
package contents
Assemble two units
Pre-configure the units
Test the units