Wilan LIBRA 5800 AP, User Manual

Page: 62 / 156

Configuration
62 Libra 5800 Series User Guide
Restoring the Factory Configuration
You can restore a unit to its factory configuration to put it into a known state for troubleshooting or to
remove customized configurations when decommissioning a unit.
➧
To restore the factory configuration
1. From the Main System Menu, select
System Commands
and press
Enter
.
The System Commands menu appears.
2. Select
Restore Factory Configuration
and press Enter .The factory configuration
settings are restored.
➧
To restore the power-on configuration
1. From the Main System Menu, select
System Commands
and press Enter .
The System Commands menu appears.
2. Select
Restore Poweron Configuration
and press Enter . The configuration settings
change back to what they were the last time the unit powered up.
Important
When you restore factory configurations, many settings revert automatically to
their default values, including passwords, IP Address, radio and configuration
settings.
System Commands
Set Default System Image lib5800-3-2-0.wil
Reboot Current Image Press Enter to Execute
Reboot a System Image lib5800-3-2-1.wil
Restore Factory Configuration Press Enter to Execute
Restore Poweron Configuration Press Enter to Execute
Reset MAC Layer Statistics Press Enter to Execute
System Commands
Set Default System Image lib5800-3-2-0.wil
Reboot Current Image Press Enter to Execute
Reboot a System Image lib5800-3-2-1.wil
Restore Factory Configuration Press Enter to Execute
Restore Poweron Configuration Press Enter to Execute
Reset MAC Layer Statistics Press Enter to Execute