Wilan LIBRA 5800 AP, User Manual

Page: 42 / 156

Configuration
42 Libra 5800 Series User Guide
➧
To enable Ethernet access to the TCP/IP
4. Move the cursor to the
System Ethernet Access
field and press Enter .
5. Select the desired setting from the list by using the up and down arrow keys and press Enter .
6. Press Enter . The change has been made.
Setting Local Network MAC Filtering
This is also known as LANCAM (Local Area Network Content Addressable Memory) filtering. A Local
network MAC filter is simply a list of MAC addresses of units that are located on the same LAN. Data
flowing between units in the list is
not sent across the wireless link. The table shows up to eight local
MAC addresses that are automatically discovered by the unit when Local Network MAC filtering is
on. This filtering enables data to be handled more efficiently and saves radio bandwidth for traffic that
really needs it.
➧
To set software Local Network MAC filtering
1. Move the cursor to the
Local Network MAC Filter
field and press Enter . The entry field
highlights.
2. Select
On
or
Off
from the list by using the up and down arrow keys and press Enter . The change
appears on the screen.
Setup Menu - Second Screen
The following set of parameters are available on page 2 of the setup screen. Move the cursor to the
Monitor
field on the first screen and press the Enter key to get to the second screen as depicted
below.
on Enable configuration access to the unit from
Ethernet
off Disable configuration access to the unit from
Ethernet