Wilan LIBRA 5800 AP, User Manual

Page: 66 / 156

Configuration
66 Libra 5800 Series User Guide
packets between the wired ethernet interface and the RF interface. A sample scenario of this is when
both Libra and AP units are connected to VLAN switches.
There is no VLAN setting available on the AP. The AP transparently bridges VLAN packets in a
trunking fashion. If users plan to use VLAN functionality on their network, it is advisable to have a
VLAN switch located between the AP and its ethernet network.
Note: All packets with CFI=1 (Canonical Format Inidicator) in the 802.1Q VLAN tag control
information field will be discarded.
➧
To set VLAN Tagging
Note: VLAN Tagging can only be set for the CPE and LCPE in a P-MP system and on the remote in
a P-P system. This item does not appear in the Network configuration menu for the AP or for
the base station.
1. From the Main System Menu, select
Network Configuration
and press Enter .
The Network Configuration menu appears.
2. Select
VLAN Tagging
and press Enter . The entry field highlights.
3. Type
Enable
or
Disable
and press Enter . The change appears on the screen.