Radio Configuration
75
Setting the Modulation Type
The OFDM Modulation Type can be selected from among the following possible values: "QAM 16",
"QPSK" and "BPSK". The selected type will be added to the next superframe transmitted.
➧
To set the Modulation Type
1. From the Main System Menu, select
Radio Configuration
and press
Enter
.
The Radio Configuration menu appears.
2. Select
Modulation Type
and press
Enter
. The field highlights.
3. Use the up/down arrows to select the desired modulation type from the pull down list, and press
enter again. This change requires a reboot to take effect.
Radio Configuration
OFDM Station Type Base Station
RF Station Id [1..2047] -> 2
Sector Id [0..31] 1
Synchronization Id [0..1] 0
Base Station Tx Disable
Center Freq (kHz) 5787000
Set Tx Power (dBm) [-3...17] 17
Modulation Type QAM 16
Note: Changes on this menu aside from Tx Power require that
the unit be rebooted to take effect.
Summary of Contents for LIBRA 5800 AP
