Wilan LIBRA 5800 AP, User Manual

Page: 13 / 156

June 2003 Rev 0 13
Description
Overview
This information in this guide applies to the "LIBRA 5800" Series products, including the following.
This chapter presents an overview of the LIBRA 5800 Series product.
Libra 5800 Series System Features
• Point-to-Point (P-P) system: Rapid Deployment (RD) units with integral 23 dBi antena or
Extended Range (ER) units with N-Type (F) RF connector for use with high gain external
antenna.
• Point-to-Multi-Point (P-MP) system: Access Point (AP) with N-Type (F) RF connector for use
with external sectoral, omni or other antennas, Customer Premise Equipment (CPE) with
integrated 23 dBi antenna and Long Range CPE (LCPE) with N-Type RF connector for use
with high gain external antenna
• fast transmission speeds–up to 32 Mbps raw data rate in 10 MHz channel (12.5 MHz
separation)
• Efficient use of spectrum
• cost-effective–wireless solution is inexpensive compared to wire line alternatives
• fast and easy to deploy
• enhanced multipath capabilities enable non-, near- and obstructed-line-of-sight operation
• operates in the unlicensed 5.8 GHz band
• advanced error recovery and signal processing
• easy-to-operate user interface and system configuration
Data Rate / Channel Size BWS Model Frequency (TDD System)
32 Mbps, 12.5 MHz channel separation Libra 5800 CPE TX&RX: 5725-5850
32 Mbps, 12.5 MHz channel separation Libra 5800 LCPE TX&RX: 5725-5850
32 Mbps, 12.5 MHz channel separation Libra 5800 AP TX&RX: 5725-5850
32 Mbps, 12.5 MHz channel separation Libra 5800 RD TX&RX: 5725-5850
32 Mbps, 12.5 MHz channel separation Libra 5800 ER TX&RX: 5725-5850