Wilan LIBRA 5800 AP, User Manual

Page: 124 / 156

Appendix E: Bench Configuration Testing
124 Libra 5800 Series User Guide
Tools and equipment
You will need the following tools and equipment to perform a bench test.
Checking shipping package contents
Check the shipping package contents to ensure that you have all the parts you need .
The CPE shipping package should contains the following items:
• 1x Libra 5800 Unit (with Integrated Antenna (CPE, RD units) or without (AP, LCPE, ER))
• 1x Power Cord
• 1x Power Inserter
• 1x Libra 5800 User Manual (CD ROM)
• 1x Mounting Kit
• 1x Mounting base
• 1x Wall Mount Clamp
• 1x Clamp
• 1x Arm
• 4x Washer Flat M5
• 4x Washer Spring M5
• 4x Nut M5
• 4x Screw Hex Cap M5x0.8 16mm
• 6 x Washer Flat M8
• 4x Washer Spring M8
• 2x Nut M8
• 4x Screw Hex Cap M8x40 (for 1 3/4" dia pole)
3/16” nut driver
Cables: CAT-5 / Power cables with RJ-45 connector (not supplied with units).
PC or PDA with a terminal emulation software such as HyperTerminal and network
software (ftp and ping)
RS-232 cable to connect the PC or PDA to the serial port of the Libra. This is a
straight-through DB9 connector. (except for PDA which may differ depending on make
and model) Pins 2,3 and 5 correspond to transmit data, receive data, and ground. A
weatherproof RS-232 cable is available from Wi-LAN (part no. 6010-1404)
AC plug or converter for the Libra power inserter. Different countries have different
power supplies, so only the cord is supplied, not the plug.
For AP, LCPE and ER units an external antenna and RF Cable with N-type connector
is needed.