page 3 – 20
AM-10HD / Aug 2008
A M - 1 0 H D G U I
Control Area Region
This is the large “enclosed” area directly above the graph and meters.
All of the knobs, faders, switches, and checkboxes affecting the audio pro‑
cessing itself are within this area. To operate them, either:
Place the cursor over the desired control, and use the mouse’s scroll wheel
to “increase” or “decrease” the control’s position, or
Click on the control, and slide the mouse to move the control – up or right
increases the control’s indicated position, down or left decreases it. When
using the mouse in this fashion (as opposed to using the scroll wheel), the
resolution of the control variation can be increased – made finer – by hold
‑
ing down the keyboard’s Ctrl key while adjusting the control as above, or
In most cases you can double click on the text that indicates the setting
value (for example, the window that reads X.XdB under the Line Gain
knob on the Input Section) and a box will pop up where you can enter an
exact value and click OK.
From left‑to‑right across the upper portion of the graphical area are a series
of buttons corresponding to logically grouped processing sections in general
input‑to‑output signal flow fashion.
A small green indicator at the left end of each button indicates if any signal
processing within that block is active. Left‑clicking a button opens the associated
control panel to gain access to the controls for that block of signal‑processing.
