Specialized Concentrated Focused
「
44
」
Machining Operations
machining file
→
press
to load the selected file.
Load an ENG File with Tool Selection Function
Find the desired ENG file following the steps above-mentioned to load an ordinary file, and then press
[OK] to select the ENG file to be machined, and then press
to automatically enter the tool
selection page as shown in Fig. 4-17.
N u m b er o f to o ls : 2
C u tter 1 : [F la t B o tto m ]J D -6 .0 0
T o o l N o .: 0
Fig. 4-17 Tool selection page
Number of tools: the number of tools in this ENG file
Tool No.: current tool No., selected by pressing the
―Up‖ and ―Down‖ keys
Cutter: selected by pressing the
―Up‖ and ―Down‖ keys, displaying tool sequence number and name
After parameters are set, press [OK] to load the file; after loading, the system will return to the machining
page automatically.
4.9.3.
Set Workpiece Origin
Workpiece origin is the zero of X, Y, and Z/A in the machining file. Before machining, you must set
workpiece origin to determine its actual position.
Manually move the X and Y axes to the desired origin position, and then press
for XY clearing,
i.e.to confirm the position of XY workpiece origin.
For Z/A workpiece origin, there are two ways to set it:
Method one is the same as that to set XY workpiece origin. Manually move the Z/A axis to the
desired origin position. And then press
+
for Z/A clearing, i.e. to confirm the position
of Z/A workpiece origin.
