Specialized Concentrated Focused
「
56
」
References
Parameters Related with Tool Change
Parameter
Meaning
Setting range
ATC Capacity
Capacity of tool magazine
1~20
Current ToolNo.
Tool No. currently used
1~Value of ATC Capacity
Tool Offset
Modification to the tool offset along each axis
X/Y/Z: -10000~10000 mm
ToolChangeTip
Whether to send prompt when there is tool change
command in the file
Yes: Valid; No: Invalid
X/Y/Z Cali Coor
The machine coordinate (X/Y/Z) of tool presetter in
fixed tool measurement
/
CaliToolHeigh
The required tool lifting height after the end of tool
measurement
0.001~9999 mm
Ignore Command
Parameter
Meaning
Setting range
Ignore F Code
Whether
to
enable
the
feedrate
command in the machining file
Yes: Enable the feed rate in the system
No: Enable the feed rate in the
machining file
Ignore S Code
Whether
to
enable
the
spindle
command in the machining file
Yes: Enable the spindle command in
the system
No: Enable the spindle command in the
machining file
7.1.2.
Parameters of Manufacturer
’s Access
Parameters Related with Velocity
Parameter
Meaning
Setting range
Decel. Dist.
To protect tools, the machine tool will decelerate (at
[Approach Speed]) when approaching the target
position during positioning. This parameter is used
to specify the distance from the decelerating
position to the target position.
0~999mm
Approach
Speed
It is the feed speed of the tool when approaching
workpiece during positioning (the distance between
the tool and workpiece is smaller than deceleration
distance).
Jump speed ~ Machining
speed
Sgl Axis Acc.
Description of the acceleration/ deceleration
capability of each feed axis, in
―mm/s
2
‖
0.001~100000.0mm/s
2
Max. Turn Acc.
The max. acceleration of feed motion on adjacent
axes
0.001~100000.0 mm/s
2
Jerk
The change rate of acceleration of single axis
(acceleration‘s acceleration)
0.001~100000.0 mm/s
3
Max. Speed
It specifies the max. speed of X, Y, Z and A axes.
0.06~100000.0 mm/min
