Specialized Concentrated Focused
Summarization
「
1
」
1. Summarization
Independently-developed by Weihong and based on embedded industrial control platform, the four axes
integrated CNC system NK105G2F/G3F provides a whole set of solutions to engraving machines.
The integrated CNC system NK105G2F/G3F is composed of a host system and an operation panel. Also
called control box, the host system integrates system control card, terminal board and other parts, and
connects with the operation panel via a 15-pin extension cable.
The up and down ends at the back of the control box are used to inlay terminals while the left side
includes an USB interface and a DB15 interface. The DB15 interface is for connection with the operation
panel, while the USB interface for external connection with USB equipment (e.g. USB flash drive).
Also called handheld box, the concise and portable operation panel is connected with the host system
via a 15-pin extension cable, so it can work independently without the distribution box to facilitate
machine tool control. And its moving distance is only restricted by the length of extension cable.
1.1. Basic Configuration
NK105G2F/G3F system is composed by handheld box and control box. Refer to following table for
details.
Table 1 Basic configuration
Components
System
Handheld box specification Control box specification
NK105G2F
NK105G2 handheld box
NK105 four axes control box
NK105G3F
NK105G3 handheld box
NK105 four axes control box
