WBOX Technologies 0E-16CHNVR2T User Manual Download Page 95

Page: 95 / 97

Web Access

Network Video Recorder(NVR)

User Manual

Issue V1.0 (2018-05-11)

Figure 9-4

Alarm Search

interface

Step 2

Select a camera in the left

Cameras

pane.

Step 3

Select an alarm type from the

Type

dropdown list.

Step 4

Select a date.

Select a date in the

Date

pane. Click

and

to change months or click

and

to change years.

indicates the selected date. The red color indicates

that there are alarm records generated on that day.

Step 5

Display videos.

After a camera and date are selected, alarm video files are displayed in the

Type

pane.

Step 6

Play a video.

Click an alarm video file and the video begin to play.

Step 7

Back up an alarm record.

Select a video and click the

Backup

button to back up the video to the backup folder.

-----End

9.5 NVR Setup

Click

NVR Setup

in the navigation bar at the top of the web interface.

The

NVR Setup

interface appears, as shown in Figure 9-5.

You can set NVR parameters. For details, see section

8.1 "NVR Setup"

Summary of Contents for 0E-16CHNVR2T


































































































Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands

WBOX Technologies 0E-16CHNVR2T, User Manual

Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands