WBOX Technologies 0E-16CHNVR2T User Manual Download Page 32

Page: 32 / 97

Live Video

Network Video Recorder(NVR)

User Manual

Issue V1.0 (2018-05-11)



Add, delete, and invoke preset positions.



Add, delete, and invoke tracks.



Add, delete, and invoke scans.



Add, delete, and invoke tours.



Set the idle.



Set the timer.



Set the extension.

Set Light On/Off and Brush function.

Brush is used to clean the lens. Light On/Off is used to control the infrared camera
shields on and off.



Brush is available only to a camera with a brush or a camera shield.



Light On/Off is available only to specific camera shields.

Quick operation on the

Live Video

interface

Right-click the mouse button and the

Live Video

menu appears (shown in Figure 5-3),

where you can choose to bookmark record, sensor, interphone and stream information.

Figure 5-3

Live Video

----End

Summary of Contents for 0E-16CHNVR2T


































































































Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands

WBOX Technologies 0E-16CHNVR2T, User Manual

Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands