WBOX Technologies 0E-16CHNVR2T User Manual Download Page 30

Page: 30 / 97

Live Video

Network Video Recorder(NVR)

User Manual

Issue V1.0 (2018-05-11)

No.

Name

Description

icon becomes

Open stretch. Click

to close stretch and the

icon becomes

Open fluency pattern. Click

to close fluency

pattern and the icon becomes

: The PTZ control menu appears when you click this

button.

: Save layout, It is valid when create a layout and

change a layout.

Live
Video

pane

This pane plays live videos and provides the front-end
parameter setting function.

To change a code stream manually, right-click and select a
new code stream among the ones supported by the video
device from the

Stream

option in the shortcut menu. Code

stream information is displayed at the bottom of the video
pane.

Automatic full screen

Click

and choose whether to enable automatic full screen and the delay time to

enable automatic full screen in the shortcut menu. If automatic full screen is enabled,
the full screen is displayed when no operation is performed during the delay time.



A toolbar appears when you move the cursor to the bottom of the full screen. To exit the

full screen, click

in the toolbar.



To enter the full screen mode manually, click

PTZ operation

All PTZ functions are only available to High Speed Network Dome and device
connected to an external PTZ.

Click

. The PTZ operation menu appears, as shown in Figure 5-2. The following

items can be configured: PTZ direction, zoom, preset position, track, scanning, home
position, infrared lamp, true north, and timer.

Summary of Contents for 0E-16CHNVR2T


































































































Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands

WBOX Technologies 0E-16CHNVR2T, User Manual

Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands