WBOX Technologies 0E-16CHNVR2T User Manual Download Page 49

Page: 49 / 97

Setting

Network Video Recorder(NVR)

User Manual

Issue V1.0 (2018-05-11)

Figure 8-8

Stream

interface

Step 2

Set the parameters according to Table 8-4.

Table 8-4

Stream parameters

Parameter

Description

Setting

Channel ID

ID of the video output channel.

NOTE

An IP camera has only one video output
channel. Therefore, only the default value

is available.

[Setting method]

Select a value from the
drop-down list box.

[Default value]

Stream ID

The device supports two streams.



Streams 1 and 2 use the H.264 codec.



The maximum resolution can be set for
streams 1.



Only a low resolution can be set for
stream 2.

[Setting method]

Select a value from the
drop-down list box.

Name

Stream name.

NOTE

The stream name is combined with Chinese
character, number, character and underline.

[Setting method]

Enter a value manually.
The value cannot exceed
32 bytes.

[Default value]

stream1

Summary of Contents for 0E-16CHNVR2T


































































































Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands

WBOX Technologies 0E-16CHNVR2T, User Manual

Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands