WBOX Technologies 0E-16CHNVR2T User Manual Download Page 62

Page: 62 / 97

Setting

Network Video Recorder(NVR)

User Manual

Issue V1.0 (2018-05-11)

Take the following steps to set video lost alarm:

Step 1

Setting

NVR Setup

Channel>video lost Alarm

The

video

lost alarm

interface is displayed, as shown in Figure 8-16.

Figure 8-16

Video Lost Alarm

interface



Step 2

Select channel ID.

Step 3

Click

video lost alarm

button to enable video lost alarm.

Step 4

Set schedule.

For details, see

8.3.7 Step 6 Set motion alarm schedule.

Step 5

Check

Channel Record

. Select a channel ID, input the post record to enable record

linkage.

Step 6

Check

Channel PTZ

. Select a channel ID and preset to enable PTZ linkage. Click

to add another Channel PTZ.

Step 7

Check

Alarm Output

. Select alarm output channel ID and alarm output time(s) to

enable alarm output linkage.

Step 8

Check

Send Email

to enable email linkage.

Step 9

Click

Apply

. The message "Apply success" is displayed.

Step 10

Click

. The system saves the settings.

Summary of Contents for 0E-16CHNVR2T


































































































Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands

WBOX Technologies 0E-16CHNVR2T, User Manual

Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands