WBOX Technologies 0E-16CHNVR2T User Manual Download Page 73

Page: 73 / 97

Setting

Network Video Recorder(NVR)

User Manual

Issue V1.0 (2018-05-11)

Figure 8-26

The

PPPoE

interface

Step 2

Click the button on to enable

PPPoE

. Set the parameters according to Table 8-8.

Table 8-8

PPPoE parameters

Parameter

Description

Setting

PPPoE

Indicates whether to enable the
PPPoE service.

[Setting method]

Click the button on.

[Default value]

OFF

Account

PPPoE user name provided by the
network carrier.

[Setting method]

Enter a value manually.

Password

Password provided by the
network carrier.

[Setting method]

Enter a value manually.

Step 3

Click

Apply

If the message "Apply success" is displayed, click OK. The system saves the
settings.

If other information is displayed, set the parameters correctly.

-----End

Summary of Contents for 0E-16CHNVR2T


































































































Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands

WBOX Technologies 0E-16CHNVR2T, User Manual

Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands