WBOX Technologies 0E-16CHNVR2T User Manual Download Page 94

Page: 94 / 97

Web Access

Network Video Recorder(NVR)

User Manual

Issue V1.0 (2018-05-11)

Step 4

Display videos.

After a camera and date are selected, video information is displayed below the video
pane. The time scale above the file axis shows the different time points of video
recording. The time in blue in the middle is the time of the video being played.

The file axis displays videos. Alarm videos are in red and ordinary videos are in green.

Step 5

Play a video.

After selecting a camera and date, the video begin to play.

: indicates play, stop, fast-forward, and fast-backward from left to right.

Figure 9-3

Playback

interface

-----End

9.4 Alarm Search

Step 1

Click

Alarm Search

in the navigation bar at the top of the web interface.

The

Alarm Search

interface appears, as shown in Figure 9-4.

Summary of Contents for 0E-16CHNVR2T


































































































Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands

WBOX Technologies 0E-16CHNVR2T, User Manual

Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands