WBOX Technologies 0E-16CHNVR2T User Manual Download Page 60

Page: 60 / 97

Setting

Network Video Recorder(NVR)

User Manual

Issue V1.0 (2018-05-11)

Method 1

：

Click left mouse button to select any time point within 0:00-24:00 from

Monday to Sunday as shown in Figure 8-14.

Method 2

：

Hold down the left mouse button, drag and release mouse to select the

deployment time within 0:00-24:00 from Monday to Sunday.

NOTE

When you select time by dragging the cursor, the cursor cannot be moved out of the time
area. Otherwise, no time can be selected.

Method 3

：

Click

in the deployment time page to select the whole day or whole

week.

Deleting deployment time:

Click

again or inverse selection to delete the selected

deployment time.

Step 8

Check

Channel Record

. Select a channel ID, input the post record to enable record

linkage.

Step 9

Check

Channel PTZ

. Select a channel ID and preset to enable PTZ linkage. Click

to add another Channel PTZ.

Step 10

Check

Alarm Output

. Select alarm output channel ID and alarm output time(s) to

enable alarm output linkage.

Step 11

Check

Send Email

to enable email linkage.

Step 12

Click

Apply

. The message "Apply success" is displayed.

Step 13

Click

. The system saves the settings.

8.3.8 Intelligence Analyse Alarm

The following functions are provided:



Enable intelligence analyse alarm



Set intelligence analyse schedule



Set alarm linkage

Take the following steps to set intelligence analyse alarm:

Step 1

Setting

NVR Setup

Channel>Intelligence Analyse Alarm

The

intelligence analyse alarm

interface is displayed, as shown in Figure 8-15.

Summary of Contents for 0E-16CHNVR2T


































































































Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands

WBOX Technologies 0E-16CHNVR2T, User Manual

Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands