WBOX Technologies 0E-16CHNVR2T, User Manual

Page: 52 / 97

8 Setting
Network Video Recorder(NVR)
User Manual
44 Issue V1.0 (2018-05-11)
Parameter Description Setting
I Frame
Interval(f) I frames do not require other frames to
decode.
A smaller I frame interval means better
video quality but higher bandwidth.
[Setting method]
Select a value from the
drop-down list box.
Bit Rate
Type The bit rate is the number of bits
transmitted per unit of time.
The following bit rate types are
supported:

Constant bit rate (CBR)
The compression speed is fast; however,
improper bit rate may cause vague motion
images.

Variable bit rate (VBR)
The bit rate changes according to the
image complexity. The encoding
efficiency is high and the definition of
motion images can be ensured.
[Setting method]
Select a value from the
drop-down list box.
Max Bit
Rate(500-
12000) Indicates the maximum value of the bit
rate. [Setting method]
Enter a value manually.
Quality The video quality the camera output. [Setting method]
Slide the slider left or
right.
[Default value]
5
Step 3
Click Apply . the message “Setting succeed” is displayed.
Step 4
Click OK .
The system saves the settings.
-----End
8.3.4 Network
Local network parameters include:

IP protocol

IP address

Subnet mask

Default gateway

Dynamic Host Configuration Protocol (DHCP)