WBOX Technologies 0E-16CHNVR2T User Manual Download Page 37

Page: 37 / 97

Alarm Search

Network Video Recorder(NVR)

User Manual

Issue V1.0 (2018-05-11)

Alarm Search

You can search for alarm videos on the

Alarm Search

interface.

Operation procedure

Step 1

Click

at the top of the interface.

The

Alarm Search

interface appears, as shown in Figure 7-1.

Step 2

Select a camera in the

Cameras

pane. Cameras marked with

contain alarm

information.

Step 3

Select an alarm type from the

Type

dropdown list.

Figure 7-1

Alarm Search

interface

Step 4

Select a date.

Select a date in the

Date

pane. Click

and

to change months or click

and

to change years.

indicates the selected date. The red color indicates that there

are alarm records generated on that day.

Step 5

Display videos.

After a camera and date are selected, alarm video files are displayed in the

Type

pane.

Summary of Contents for 0E-16CHNVR2T


































































































Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands

WBOX Technologies 0E-16CHNVR2T, User Manual

Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands