WBOX Technologies 0E-16CHNVR2T User Manual Download Page 36

Page: 36 / 97

Video Playback

Network Video Recorder(NVR)

User Manual

Issue V1.0 (2018-05-11)

Figure 6-4

Video backup control bar



Select channels of NVR to backup.



Click

Select

in the video backup control bar to select a video segment.



Select the video file to be backed up (the selected video segment is highlighted in
blue in the display area), click and hold the left mouse button, and drag the cursor
horizontally to select the video file segment to be backed up.

Click

Backup

to back up the video.

Method 2: Click

Backup

on the

Alarm Search

interface when an alarm video is

played.

Step 4

View the file backup progress.

The

Backup Tasks

interface displays the statuses of backup tasks. A task in progress is

marked with

. A task to be done is marked with

. A stopped task is marked with

A failed task is marked with

. A completed task is marked with

Step 5

Search for a video backup file.

Access the backup folder to view completed backup files.

----End

Summary of Contents for 0E-16CHNVR2T


































































































Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands

WBOX Technologies 0E-16CHNVR2T, User Manual

Search results

Summary of Contents for 0E-16CHNVR2T

Reviews:

Related manuals for 0E-16CHNVR2T

Brands by name

Popular brands