8
Setting
Network Video Recorder(NVR)
User Manual
66
Issue V1.0 (2018-05-11)
8.6.3 SMTP
If the Simple Mail Transfer Protocol (SMTP) function is enabled, the device
automatically sends JPG images and alarm information to specified email addresses
when an alarm is generated.
Step 1
Choose
Setting
>
NVR Setup
>
Network Service
>
SMTP
.
The
SMTP
interface is displayed, as shown in Figure 8-27.
Figure 8-27
The
SMTP
interface
Step 2
Set the parameters according to Table 8-9.
Table 8-9
SMTP
parameters
Parameter
Description
Setting
SMTP
N/A
[Setting method]
Select the check box.
SMTP Server
Address
IP address of the SMTP server.
[Setting method]
Enter a value manually.
SMTP Server
Port
Port number of the SMTP server.
[Setting method]
Enter a value manually.
[Default value]
25
User Name
User name of the mailbox for
sending emails.
[Setting method]
Enter a value manually.
Summary of Contents for 0E-16CHNVR2T
Page 2: ......
